Boxin · Hengzhen · Botrust
Precision Manufacturing・Powering the World
BL6025A15-30V24J
The BL6025A15-30V24J is an integrated planetary‑reduction brushless motor rated at 24 V DC and 15 W, with a reduction ratio of 1:30, a nominal output torque of approximately 0.3–0.5 N·m, and a speed of about 150 rpm. It features low noise, long service life, and IP54 protection, making it well suited for applications such as AGV carts, smart devices, and small industrial equipment.
- Product Description
-
I. Product Overview
The BL6025A15-30V24J is a 60 mm‑diameter brushless DC motor with an integrated planetary gearbox, designed for medium‑ and low‑power automation applications. It features low noise, high efficiency, long service life, and high torque output, making it widely suitable for industrial equipment, smart devices, and other applications.
II. Explanation of Model Designations
Part Meaning BL Brushless motor 6025 Motor stator outer diameter: 60 mm; stator length: 25 mm. A15 Rated power: 15 W (or basic torque parameter, the industry‑standard designation) 30 Planetary gearbox reduction ratio 1:30 V24 Rated operating voltage: DC 24 V J Built-in encoder/drive board (definitions may vary slightly among manufacturers)
III. Core Technical Parameters (Industry-Standard Reference Values)
Parameter item Typical value Explanation Rated voltage DC24V Compatible with a wide input voltage range of 18–28 V. Rated power 15W The brushless motor’s rated power remains unchanged after gear reduction. Reduction ratio 1:30 The motor speed is reduced by a factor of 30, and the torque is amplified by approximately 30 times (with an efficiency of about 85–90%). Motor rotor speed Approximately 4,500 rpm (no load) After deceleration, the output speed is approximately 150 rpm (at rated load). Rated output torque Approximately 0.3–0.5 N·m High torque, low-speed output, ideal for heavy-load applications. Shaft diameter 8mm (common specification) Standard D-type output shaft, with keyway optional. Protection rating IP54 Dustproof and splash-proof, suitable for industrial and automation applications. Lifespan >10,000 hours Brushless design + planetary gears, with a significantly longer lifespan than brushed motors. Operating temperature -20℃~+60℃ Suitable for standard industrial environments.
IV. Structure and Core Features
- Integrated Design
- The motor and planetary gearbox are integrated into a single unit, offering a compact footprint and easy installation—eliminating the need for an external gearbox and simplifying the equipment’s overall design.
- Performance Advantages of Brushless Motors
- No carbon brush wear, low operating noise, high efficiency, maintenance-free, and excellent long-term operational stability.
- High-precision planetary gearbox
- Planetary gear reducers offer high precision, low backlash (≤1°), and high transmission efficiency, balancing torque amplification with smooth operation.
- Optional feedback feature
- Some versions come equipped with Hall-effect or magnetic encoders, supporting closed-loop control and enabling precise speed and position regulation.
V. Typical Application Scenarios
- Automation equipment: AGV carts, smart door locks, electric valves
- Industrial equipment: small conveyor lines, medical instruments, electric pan-tilt units
- Consumer Electronics: Smart Home, Robot Vacuums, Small Appliances
VI. Usage and Selection Recommendations
- Driver Compatibility: Requires a 24V DC brushless motor driver (such as a model that supports Hall‑effect signals).
- Torque–Speed Balance: The higher the reduction ratio, the greater the output torque, but the lower the speed; select accordingly based on the load’s speed requirements.
- Load matching: Avoid operating continuously at torque levels exceeding the rated value, as this will shorten the gearbox’s service life.
- Installation method: Standard flange mounting, supporting multiple installation orientations.
Keywords:
Submit your information
Note: Please provide your email address. Our specialists will contact you as soon as possible!